Vaporesso XROS Pro 2 Pod Kit

Vaporesso XROS Pro 2 Pod Kit

The XROS Pro 2 is the flagship of the XROS range. A 2000mAh battery, 30W, a 0.96 inch colour screen with six themes, and Super Pulse, which Vaporesso had previously kept for their tank mods.

It has the biggest battery in the line by some margin, in an alloy body that stays light for what it holds. The screen is driven by the button below it rather than by touch.

Two Pro 2 pods come in the box, a 0.4 ohm and a 0.6 ohm, and every other XROS pod fits the kit as well, so nothing bought for an older XROS goes to waste. The rest of the Vaporesso range is listed separately.

Key Features

• 2000mAh battery: the largest in the XROS range
• 30W maximum: 0.5W steps on the 0.4 ohm pod, modes on the rest
• Super Pulse: Vaporesso's pulsed output, brought down from their tank mods
• 0.96 inch TFT screen: six themes, wattage, resistance, battery and puff count
• Button and auto draw: either fires it, and the button can be switched off
• Screen lock: stops the settings changing in a pocket
• Alloy body: Vaporesso call it aerospace alloy
• COREX 3.0: their current mesh, on the Hive-Mesh structure
• Two pods included: 0.4 ohm fitted and 0.6 ohm spare
• Every XROS pod: 0.4, 0.6, 0.8, 1.0 and 1.2 ohm all fit
• Seven colours: three Glittering finishes and four plain

Super Pulse

Super Pulse is the feature Vaporesso put at the front of the XROS Pro 2 pod kit, and it came down from their tank mods rather than up from the rest of their pod range. Instead of holding one steady output, it pulses the power through the draw.

What that gives you is a faster ramp at the start of the inhale, so the flavour arrives sooner without the overall power going up. It is most noticeable on nic salt at the lower wattages.

The 0.96 Inch Screen and Six Themes

The screen is a 0.96 inch TFT and it is not a touchscreen. The button below it does the navigating, and the display carries the wattage, the coil resistance, the battery and the puff count.

Vaporesso ship six themes for the XROS Pro 2, named Meter, Flower, Planet, Basic, Bubble and Light. They change the look of the home screen rather than what it tells you.

Power, Normal and Eco

Alongside Super Pulse, there are three output modes:

• Power: gives the warmest draw
• Normal: the everyday setting
• Eco: trims the output so the charge goes further.

Which one you get to use depends on the pod. With the 0.4 ohm you set a wattage directly in 0.5W steps. With a 0.6, 0.8, 1.0 or 1.2 ohm pod you pick a mode instead, and the kit sets the power for you.

How Long the XROS Pro 2 Lasts on a Charge

Half an hour on charge is enough for two days of vaping, which is Vaporesso's own claim and the figure worth knowing when you are heading out and the battery is low. Charging is Type-C at 5V/2A, so it is the slower charger of the two flagships: the XROS 6 takes 3A.

A full charge took around 55 minutes in our own testing. Vaporesso publish no figure for that themselves.

How long 2000mAh lasts between charges depends on how you vape. The 0.4 ohm pod at 25 to 30W drains it far quicker than a 1.0 ohm pod in Eco, so the honest answer is a range rather than a number. What is fixed is that it is the largest battery in the XROS pod kit range.

Vaporesso put that in context themselves: The XROS Pro 2 battery has 67% more capacity than the original XROS Pro, which was 1200mAh, and 33% more than what they describe as leading competitors.

An LED below the screen shows the battery level at a glance while it charges: green from 70% up, blue between 30% and 70%, and red below 30%.

Which Pods Fit the Vaporesso XROS Pro 2

All of them. Vaporesso list the XROS Pro 2 as taking the whole XROS pod range, and both pod generations share the same fitting.

Pod	Draw and e-liquid (our view)
0.4 ohm	The loosest draw, 50/50 at a lower strength
0.6 ohm	RDL sweet spot, 10mg nic salt or 50/50
0.8 ohm	RDL sweet spot, 10mg or 20mg nic salt
1.0 ohm	Tight mouth to lung, 20mg nic salt
1.2 ohm	Tight mouth to lung, 20mg nic salt

The 0.4 ohm is the one that unlocks wattage control, which is why Vaporesso fit it rather than a higher resistance. Replacements are the COREX 3.0 pods, four to a pack.

XROS Pro 2 or XROS 6

The difference between choosing the XROS Pro 2 or XROS 6 comes down to whether you want the bigger 2000mAh battery of the XROS Pro 2 or the VENTURI airflow of the XROS 6.

	XROS Pro 2	XROS 6	XROS 5 Nano
Battery	2000mAh	1800mAh	1600mAh
Screen	0.96 inch TFT	0.88 inch TFT	1.09 inch touchscreen
Activation	Button or auto draw	Button or auto draw	Auto draw only
Standout	Super Pulse	VENTURI airflow	Touchscreen, square body
Priming	Five minutes	60s Smart Prime	Five minutes
Pods in box	0.4 and 0.6 ohm	0.6 and 0.8 ohm	0.6 and 0.8 ohm
Charging	Type-C, 2A	Type-C, up to 3A	Type-C, 2A

The Pro 2 has the biggest battery and Super Pulse. The XROS 6 is newer, smaller, and the only one of the three with VENTURI airflow and the sixty-second priming.

The XROS 5 Nano is the odd one out: a square body with a touchscreen, and no fire button at all.

The Seven XROS Pro 2 Pod Kit Colours

It comes in seven finishes.

Finish	Colours
Glittering	Glittering Black, Glittering Gold, Glittering Silver
Plain	Storm Blue, Gem Green, Moonlit Pink, Dawn Purple

Moonlit Pink is the pink one, and Dawn Purple is the closest thing to a lilac in the range.

XROS Pro 2 Release Date and UK Availability

It is out. Vaporesso launched the XROS Pro 2 at InterTabac in September 2025 and it has been on sale in the UK since, in the 2ml version.

Vaporesso have added finishes to the range since launch, so the colour list in some of the older write-ups is shorter than the current range.

How to Use the Vaporesso XROS Pro 2

A new pod needs five minutes before the first draw, which is Vaporesso's own instruction for this kit.

Five steps to get started with your XROS Pro 2 pod kit:

1. Lift the pod out. Snap off the mouthpiece, squeeze the e-liquid in through the filling hole, then put the mouthpiece back and make sure it is shut firmly.
2. Push the pod back into the kit.
3. Leave it five minutes. This is what stops a fresh pod tasting burnt.
4. Click the button five times to switch the kit on.
5. Draw on it, or hold the button. Either fires it.

The airflow toggle is on the side of the battery: closed for a tight cigarette-style draw on nic salt, open for a looser one.

There is a longer hands-on Vaporesso XROS Pro 2 review covering how it handles over a few weeks.

Vaporesso XROS Pro 2 Specifications

Spec	Detail
Brand	Vaporesso
Type	Refillable pod kit
Battery	2000mAh, built in
Output	30W maximum
Activation	Fire button and auto draw
Screen	0.96 inch TFT, not a touchscreen
Themes	Six: Meter, Flower, Planet, Basic, Bubble and Light
Charging	Type-C, 5V/2A
Indicator	LED below the screen, green, blue and red by charge level
Airflow	Adjustable, toggle on the side
Coil technology	COREX 3.0, Hive-Mesh structure
Pods	XROS, 0.4 to 1.2 ohm
Modes	Super Pulse, plus Power, Normal and Eco
Size	121.1 x 25.7 x 18.4mm
Weight	70g
Colours	Seven

What Is in the Box

• 1 x Vaporesso XROS Pro 2 in the colour you select
• 1 x XROS 0.4 ohm COREX 3.0 mesh pod, fitted
• 1 x XROS 0.6 ohm COREX 3.0 mesh pod, spare
• 1 x Type-C charging cable
• 1 x User manual and warranty card
• 1 x Reminder card