Vaporesso Eco Nano Plus Pod Vape Kit

Vaporesso ECO Nano Plus Pod Kit

The Vaporesso ECO Nano Plus is a compact, draw-activated MTL pod kit. The ECO Nano Plus pairs a 1400mAh battery, the first in the ECO Nano family, with a digital battery display, an adjustable airflow toggle and Lush Mesh pods with COREX Smooth Heating.

A 0.6 ohm Lush Mesh pod comes fitted, and Vaporesso state the ECO Nano Plus is compatible with the full ECO Nano pod series. It is one of the simplest pod vape kits we sell: fill the pod, set the airflow and inhale.

Browse the rest of our Vaporesso vapes.

Key Features

• 1400mAh battery: Vaporesso rate it at up to four days on one charge in lab conditions
• 2A quick charge: DC 5V/2A over Type-C
• Up to 23W output
• Digital battery display: shows your exact battery level
• Lush Mesh pods: COREX Smooth Heating for consistent, smooth flavour
• Adjustable airflow: toggle on the side, from a tight draw to a looser one
• Draw-activated: no fire button, inhale to vape
• Takes every ECO Nano pod: Lush Mesh and Mesh, 0.6 to 1.2 ohm

Vaporesso ECO Nano Plus Battery and Charging

The ECO Nano Plus is the first ECO Nano with a 1400mAh battery, which Vaporesso put at 40 percent more capacity than earlier models. Vaporesso rate the ECO Nano Plus at up to four days on one charge in lab conditions. Your own time between charges depends on the pod, the e-liquid and how often you vape.

Charging is DC 5V/2A over Type-C, which Vaporesso call quick charge. While charging, the screen shows the current battery level.

Vaporesso ECO Nano Plus Pods

The ECO Nano Plus uses Vaporesso's Lush Mesh pods with COREX Smooth Heating, which Vaporesso say gives instant, consistent vapour and smooth, rich flavour. The pod fitted in the kit is a 0.6 ohm Lush Mesh.

To fill, take the pod out, pull out the silicone plug and fill through the hole, then push the plug back in firmly. On first fill, wait five minutes for the coil to prime.

Spare ECO Nano replacement pods are sold separately.

Do ECO Nano Pods Fit the ECO Nano Plus?

Yes. Vaporesso state the ECO Nano Plus is compatible with the full ECO Nano pod series, so pods left over from an original ECO Nano or an ECO Nano Pro carry straight over. XROS pods and GTX coils do not fit.

ECO Nano pod	Resistance
Lush Mesh	0.6 ohm
Mesh	0.6 ohm
Mesh	0.8 ohm
Mesh	1.2 ohm

ECO Nano Plus Airflow

The airflow toggle on the side of the ECO Nano Plus moves the draw from tight to loose. Vaporesso design the ECO Nano Plus for MTL vaping, and Vaporesso's own cost example for the kit assumes nic salt liquid.

There is no fire button. The ECO Nano Plus is draw-activated, so you inhale to vape.

How to Use the ECO Nano Plus

• Peel the sticker off the pre-installed pod before first use.
• Take the pod out, pull out the silicone plug, fill with e-liquid and push the plug back in firmly.
• On first fill, wait five minutes for the coil to prime.
• Push the pod back into the ECO Nano Plus and set the airflow toggle.
• Inhale to vape.
• Charge with a Type-C cable. The screen shows the battery level while charging.

If the screen shows E1, E2 or E3, the ECO Nano Plus has stopped for a short circuit, a missing or high resistance pod, or high temperature.

ECO Nano Plus Colours

The ECO Nano Plus comes in six colours: Midnight Black, Space Silver, Mocha Brown, Coral Pink, Grape Green and Sky Blue.

Specifications

Spec	Detail
Dimensions	99.1 x 45.6 x 18mm
Weight	75.8g
Battery	1400mAh built-in
Charging	DC 5V/2A, Type-C
Output	Up to 23W
Activation	Draw-activated
Display	Digital battery display
Airflow	Adjustable toggle
Heating	COREX Smooth Heating
Pod fitted	0.6 ohm Lush Mesh
Pod compatibility	All ECO Nano pods

What's in the Box

• 1 x Vaporesso ECO Nano Plus battery
• 1 x ECO Nano 0.6 ohm Lush Mesh pod (pre-installed)
• 1 x User manual and warranty card
• 1 x Reminder card