Vaporesso Armour GS Pod Kit

Vaporesso Armour GS Kit

The Vaporesso Armour GS is the removable-battery member of the Armour G family. The Armour GS takes a single 18650 battery, sold separately, and fires from 5W to 80W through the AXON chip with Neo Pulse. A 0.96-inch TFT screen shows your settings.

The kit comes with the Armour G series DTL pod and two GTX mesh coils, 0.15 ohm and 0.3 ohm. The pod has top airflow and top filling.

The Armour GS sits in our Vaporesso Armour range.

Every kit from the brand is in our Vaporesso vape kits collection.

For other brands, see our vape mod kits.

If you would rather have a built-in battery, the Armour G has a 3000mAh battery and the same 5-80W output.

Key Features

• Single 18650 battery: removable, sold separately
• 5-80W output: AXON chip with Neo Pulse
• PULSE and ECO modes: plus Vaporesso's SMART power recommendation
• 0.96-inch TFT screen: three themes to choose from
• Top airflow and top filling: turn the pod's top cap to set the airflow
• GTX coil platform: 0.15 ohm and 0.3 ohm mesh coils in the box
• Type-C charging: DC 5V/2A in the device
• Dedicated lock button: alongside the power, plus and minus buttons

Vaporesso Armour GS Battery

The Armour GS takes one 18650 battery, which is not included. Pick a quality cell from our 18650 batteries range.

The Armour GS charges the battery in the device over Type-C at DC 5V/2A. While charging, the screen shows the battery level and the remaining charging time.

PULSE, ECO and SMART Modes

Press the power button three times to open the menu. PULSE mode uses constant voltage output, which Vaporesso say keeps flavour and throat hit consistent, even when the battery is low.

ECO mode is the normal wattage mode: you set the wattage to suit your coil, and Vaporesso say vaping time lasts longer than in PULSE mode.

In the settings menu, SMART on recommends the best power automatically when a GTX coil is fitted. The menu also holds a wattage lock, a five-day puff counter, brightness and an on or off switch for the vaping animation.

Click the power button five times within two seconds to switch the Armour GS on or off. The Armour GS has its own lock button.

Vaporesso Armour GS Coils and Pods

The Armour GS uses the GTX coil platform. The DTL pod in the kit takes GTX 0.15, 0.2, 0.3 and 0.4 ohm mesh coils. For MTL, the Armour G series MTL pod takes GTX 0.4, 0.6, 0.8 and 1.2 ohm mesh coils.

Spare GTX mesh coils come in packs of five.

Replacement Armour G series pods fit both the Armour G and the Armour GS.

GTX mesh coil	Vaporesso suggested power
0.15 ohm	60-75W
0.2 ohm	45-60W
0.3 ohm	32-45W
0.4 ohm	26-32W
0.6 ohm	20-26W

To fill, pull out the silicone plug on the pod and fill through the hole. Wait five minutes for a new coil to soak before vaping.

Specifications

Spec	Detail
Dimensions	126 x 39 x 28mm
Battery	1 x 18650 (not included)
Output	5-80W
Chip	AXON with Neo Pulse
Modes	PULSE, ECO, SMART on or off
Display	0.96-inch TFT screen and LED light
Charging	DC 5V/2A, Type-C
Airflow	Top airflow, turn the top cap
Fill	Top fill, silicone plug
Coils in the kit	GTX 0.15 ohm and 0.3 ohm mesh
Colours	Black, Brown, Silver, Pink, Green, Blue

What's in the Box

• 1 x Vaporesso Armour GS mod
• 1 x Armour G series pod (DTL)
• 1 x GTX 0.15 ohm mesh coil (pre-installed)
• 1 x GTX 0.3 ohm mesh coil
• 1 x Type-C cable
• 1 x User manual and warranty card