Thundercloud X Monarchy Build Tap Kit

ThunderCloud Build Tap Kit

A digital resistance tester and coil firing platform from ThunderCloud for rebuildable atomisers. Connect your RBA or build deck to the spring-loaded 510 connector, check the resistance in Meter Mode, then switch to Fire Mode to pulse-heat and check for hot spots. Powered by a rechargeable 18650 battery (not included) with Micro USB charging. Ships in a storage case with two premade coils.

Key Features

• Digital ohm meter and coil firing in one unit
• Spring-loaded 510 connector
• Meter Mode for resistance reading
• Fire Mode for pulse-heating and hot spot checking
• Single 18650 battery (not included)
• Micro USB charging
• Multiple circuit protections
• Storage case included
• 80 x 60 x 23mm

How to Use

1. Connect the atomiser or build deck to the 510 connector
2. Switch to Meter Mode and check the resistance is stable
3. Switch to Fire Mode and briefly pulse the fire button
4. Check the coil glows evenly from the centre outward
5. Adjust any hot spots, re-check resistance, and repeat

What's in the Box

• 1 x ThunderCloud Build Tap Kit (80 x 60 x 23mm)
• 2 x Ni80 2-Core Clapton Coils (26GA x 2 + 38GA, 3.0mm ID, ≈ 0.28 ohm)
• 1 x Storage case (110 x 75 x 30mm)

Battery is NOT included.