Geekvape Z Nano 3 Tank

Geekvape Z Nano 3 Vape Tank

The Z Nano 3 is the third generation of Geekvape's compact Zeus tank. The two upgrades that matter are both about keeping e-liquid where it belongs.

The fill cap now pushes open and stays attached to the tank, so there is nothing to unscrew and nothing to put down. And airflow comes in through the top rather than the base, which is the design that stops a tank weeping into your mod.

It is 28mm across and 57.25mm tall, which puts it in the same bracket as most 24mm to 30mm sub-ohm tanks without the bulk of a full size one. Two coils come in the box, one already fitted.

Z Nano 3 Key Features

• The fill cap pushes open and stays attached, so there is nothing to put down and lose
• Airflow enters from the top, which is what keeps e-liquid out of the base
• Your existing B Series coils carry over from a Z Nano 2, Aegis Boost or Aegis Hero
• Covers a tight MTL draw through to a warm DTL one, depending on which coil you fit
• Two coils in the box, one already fitted and one spare
• A spare glass and a second, wider drip tip included
• Airflow adjusts on the top ring rather than down at the base
• Goes on any regulated mod

The B Series Coil Range

The Z Nano 3 takes Geekvape B Series coils, the same family the Z Nano 2, Aegis Boost and Aegis Hero use, so a spare pack in your drawer is not wasted. Seven resistances cover the range.

Coil	Wattage	Draw
B0.15 Boost	60W to 75W	DTL
B0.2 Boost, pre-installed	50W to 58W	DTL
B0.3 Boost	30W to 38W	DTL
B0.4 Boost, spare in the box	25W to 35W	RDL
B0.6	15W to 25W	RDL or MTL
B0.8 MTL	12W to 16W	MTL
B1.2 MTL	8W to 12W	MTL

Note there are two 1.2ohm coils in the B Series. The MTL one is rated 8W to 12W, the Classic one 10W to 14W. Both fit, they are tuned differently, and either suits nic salts at 10mg or 20mg.

Push to Open Filling

Press the top cap and it swings open, staying hinged to the tank. Then just fill, and press it shut. There is no thread to cross, no cap balanced on the counter, and it can be done one handed.

Top Airflow and Why It Matters

Most leaks start at the base, where bottom airflow gives e-liquid a route straight out onto the mod. The Z Nano 3 draws air in at the top and channels it down inside the tank, so the only opening at the bottom is the coil itself. Pair it with a 70/30 shortfill on the sub-ohm coils.

Coming from the Z Nano 2

The Z Nano 3 and Z Nano 2 tanks take the same coils. So your coils carry straight over, which is the main thing.

What is new is the push to open cap and the top airflow, both of which are aimed at the leaking the Nano 2 was known for.

Colours

Four finishes: Black, Blue, Silver and Rainbow. The Rainbow is the anodised multi-tone one that shifts depending on the light.

Specifications

Specification	Detail
Model	Geekvape Z Nano 3
Diameter	28mm
Height	57.25mm
E-liquid capacity	2ml, UK TPD
Fill	Push to open, top fill
Coil platform	Geekvape B Series
Resistances	0.15, 0.2, 0.3, 0.4, 0.6, 0.8 and 1.2 ohm
Coils included	B0.2 Boost fitted, B0.4 Boost spare
Airflow	Top, adjustable
Drip tip	510, replaceable, wider bore spare included
Connection	510
Colours	Black, Blue, Silver, Rainbow

What's in the Box

• 1 x Geekvape Z Nano 3 Tank, 2ml TPD
• 1 x B0.2 Boost coil, pre-installed
• 1 x B0.4 Boost coil, spare
• 1 x spare glass tube
• 1 x spare drip tip, wider bore
• 1 x coil tool
• 1 x user manual